Customer resource library

A Trusted Partner in the Future of Your Company

Business telephone

Solutions for

Today And

tomorrow

Inter-Tel Phone system Guides - 

Changing Time and Date

 

Axxent Phone System

 

From the Administrators phone, with the handset in the cradle:

· Enter the Set Date/Time feature code, 9800

· The display shows DATE (current date).

             If you do not need to change the date, press [#] or ACCEPT soft key to skip to the

             TIME XX: XX prompt.

· Use the keypad keys to enter the month, day and year (020303).

· The display will then show the current time.

             If you do not need to change the time, press [#] or ACCEPT soft key to skip

             to the DATE prompt.

· Use the keypad keys to enter the time in hours and minutes (0900 for 9:00).

· If the system is set for 12 hour display format, the display shows SELECT AM OR PM (AM=1 PM=2).

· The display shows SYSTEM DATE AND TIME UPDATED.

 

Note: If you make a mistake, press the MUTE key to backspace or [*] or CANCEL to leave it unchanged and start over.

 

————————————————————————————————————-

Axxess System Administration

 

 To set the system Date and Time:

 

From the Operators phone, with the handset in the cradle:

· Enter the Set Date/Time feature code, 9800

· The display shows DATE (current date).

· If you do not need to change the date, press [#] or ACCEPT soft key to skip to the TIME XX:XX prompt.

· Use the keypad keys to enter the month, day and year (020303).

· The display will then show the current time.

· If you do not need to change the time, press [#] or ACCEPT soft key to skip to the DATE  prompt.

· Use the keypad keys to enter the time in hours and minutes (0900 for 9:00).

· If the system is set for 12 hour display format, the display shows SELECT AM OR PM (AM=1 PM=2).

The display shows SYSTEM DATE AND TIME UPDATED

Note: If you make a mistake, press the MUTE key to backspace or [*] or CANCEL to leave it unchanged and start over.

 

————————————————————————————————————

Encore & Encore CX  System Administration

 

From the Programming Extension, with the handset in the cradle:

 

· Press the PROGRAM key.

· Press the Scroll Down Key until SYSTEM PROGRAMMING is displayed.

· Select SYSTEM PROGRAMMING

· Enter the System Programming password, 1111 by default.

· Select SYSTEM.

· Select TIME AND DATE.

· Enter the correct time in 24-hour format (1400 for 2:00PM)

· If you only wish to set the time select CONFIRM and the display will revert to the Idle Menu

· Enter the date in MMDDYY format (121207 for December 12, 2007). When the date has been entered the display will revert to the Idle Menu.

· Press the HANDSFREE key to finish programming.

 

 

 ————————————————————————————————————

 

IMX System Administration

 

From the Administrators phone, with the handset in the cradle:

 

· Press the [SPCL] key and dial the Set Time of Day feature code, 021.

· The display shows SET TIME OF DAY.

· Enter the time in hours and minutes HHMM format.

· Press the [ * ] key for AM or the [ # ] key for PM

· Example - 900* = 9:00AM and 230# = 2:30PM

· The display shows SET DATE MM-DD-YYYY

· Enter the date month, day and year MMDDYYYY format

· The display shows SET DAY OF WEEK SUN.

· Scroll through the day of week selection by pressing the [ # ] key to go forward

   or the [ * ] key to go backward.

· When the desired day is displayed press the [SPKR] key to terminate programming.

· You will hear a progress tone.